Skid Steer Post Driver Attachment | Skid Steer Basics

The Skid Steer Post Driver attachment from Skid Steer Basics is a dependable and affordable post driving attachment for operators looking for great value. These breaker style post drivers use a proven nitrogen charged power cell, steel plate frame, and high strength steel domed head to put posts in the ground on pace with any competing attachment. Available in a 1150 lb energy class, this driver operates on skid steer loaders between 13 and 24 GPM hydraulic flow and come with universal skid steer mounts, hoses, and flat faced couplers so they’re ready to go when they arrive on your property.

Like all Skid Steer Basics products, these post drivers are extremely competitively priced without sacrificing durability and effectiveness.

• High power nitrogen power cell
• Steel plate frame 3/4″
• High strength steel domed driver head
• Mounts, hoses, couplers included
• Maintenance toolbox and nitrogen charge kit included
• Dry Fire Protection

Operation/Maintenance Tips

• Grease post driver with 5-6 pumps of grease every 2-3 hours (Hydraulic Breaker Grease works best)
• Check tightness of bolts before use
• Check the nitrogen charge annually (Should be around 230 PSI or 16 BAR)

1. Remove plug on charge port and thread gauge in.
2. Push knob in to open valve on front of gauge and check pressure.
3. If pressure is below 230 PSI or 16 BAR, hook up the hose from the gauge to the nitrogen tank.
4. Open valve slowly and watch gauge. Do not exceed 230 PSI / 16 BAR.
5. Close valve and open bleeder valve on the bottom of the gauge before disconnecting the hose from the tank.